Conveyor Belt Misalignment System

Features
  • Simple Installation - drill (3) 13/32" diameter holes
    and mount on conveyor 
  • 3/4" NPT conduit opening
  • Roller arm can move up to 90 degrees in either 
    direction and is spring loaded for automatic reset
  • Optional manual reset available
  • Operating temperature range: -40° F to 150° F

The BA100-1 and BA100-1X each have (1) limit switch and the  BA100-2 and BA100-2X each have (2) limit switches. These conveyor belt alignment switches protect conveyor belts from damage due to belt misalignment or runoff. The controls are used in pairs with one switch placed on each side of the conveyor belt. Each control consists of a red epoxy coated roller that  has a 1-1/4" diameter with nylon bushings that is adjustable up to 90 degrees in both directions. The switch actuation points are adjustable from 0 degrees to 45 degrees by a simple change of the actuating cam(s). The BA100-1 and the BA-100-2 is furnished with a heavy-duty cast aluminum housing. The BA100-1X and the BA100-2X is furnished with a heavy-duty cast aluminum explosion proof housing. Cast iron and epoxy-coated housings are also available.

Models

BA100-1: One SPDT limit switch rated for 20 A at 120 VAC, 240 VAC, or 480 VAC
BA100-2: Two SPDT limit switches rated for 20 A at 120 VAC, 240 VAC, or 480 VAC
BA100-1X: Explosion proof with one SPDT limit switch rated for 20 A at 120 VAC, 240 VAC, or 480 VAC
BA100-2X: Explosion proof with two SPDT limit switches rated for 20 A at 120 VAC, 240 VAC, or 480 VAC